How To Use
Direction To Use
Clean the substrate of oil stains and bond inhibiting compounds. Also remove any loose particles dirt, dust, and laitance.
Ensure that the surface is flat (hard and rigid) for the given application.
Ensure that the surface is well saturated before application in the case of cementatious substrates.
Mix as per mixing ratio defined in datasheet
For cementatious adhesive always add powder to water.
After mixing allow the paste to stand for 2 min for it to mature.
Do not attempt to extend the pot life by adding the more water to the mix.
Apply adhesive over the surface using the straight edge of the notched trowel. If the adhesive is buttered to the tile, then ensure proper coverage of tile surface to avoid voids.
use weber tile spacer for recommended spacing between the tiles.
After 24 hours grouting can be done on tiles and stones.
